Aluminum Clips & MLC Scrap Prices in Dover
Current Aluminum Clips & MLC prices at scrap yards in Dover, Ohio. Compare local offers against the U.S. national average to get the most money for your scrap.
Average Aluminum Clips & MLC Price
The min/max range reflects a blended index (local + national data). Your local high may be lower.
- Low (up to $0.55): Floor price, typically for small loads.
- Mid ($0.73): A fair deal for standard quantities.
- High ($1.02+): Top-dollar rate. Offered for large commercial loads or by the most competitive buyers.
Pricing verified from 1 live board rates today.
Aluminum Clips & MLC price reference for Dover, Ohio
Scrap yards in Dover, Ohio don’t always update their prices in real time. To give you a reliable current value, we use the U.S. national average ($0.70/lb). The secondary metals market tracks exchange moves consistently across the country. Use this national figure as your benchmark when negotiating with local yards. Aluminum Clips & MLC prices across the U.S. →
Top Paying Scrap Yards for Aluminum Clips & MLC in Dover, OH
These are scrap yards in Dover, Ohio that recently updated Aluminum Clips & MLC prices in our database. Call them to lock in a quote. If your city isn't listed, use the National Index above as a bargaining reference with your nearest buyer.
Don’t see your scrap yard in Dover, Ohio? List it for free.
Hundreds of sellers in your area search for current scrap prices every day. Post your buy prices and start getting calls.
🚀 List your scrap yard ⟶How Does Aluminum Clips & MLC Stack Up?
The #1 rule at scrap yards: if you mix grades, they’ll weigh everything at the lowest rate. See the price gap below — if you have higher-value metal, always sort and weigh each grade separately to avoid leaving money on the table.
Aluminum Clips & MLC Market Trends
This chart shows where the market is headed. If the line is climbing, prices are rising — you might get a better deal in a few days. If it’s dropping, don’t wait: sell today before yards lower their buy prices further.
Aluminum Clips & MLC: Scrap Yard Price vs. World Market (LME)
Avg scrap yard price
World market price (LME)
Aluminum Clips & MLC: Spread vs. Exchange — Monthly History
| Period | World price (per lb) | Scrap yard price (per lb) | Spread vs. exchange |
|---|---|---|---|
| March 2026 (current) | $1.096662 | $0.94 | -$0.16 (14.5%) |
| February 2026 | $1.2032 | $1.04 | -$0.16 (13.2%) |
| January 2026 | $1.051423 | $0.91 | -$0.14 (13.3%) |
| December 2025 | $0.982942 | $0.85 | -$0.13 (13.4%) |
| November 2025 | $0.930043 | $0.81 | -$0.12 (13%) |
| October 2025 | $0.887584 | $0.77 | -$0.11 (12.9%) |
| September 2025 | $0.86119 | $0.75 | -$0.11 (13.2%) |
| August 2025 | $0.866703 | $0.75 | -$0.11 (13.2%) |
| July 2025 | $0.837774 | $0.73 | -$0.11 (13.2%) |
| June 2025 | $0.802343 | $0.70 | -$0.11 (13.4%) |
| May 2025 | $0.807171 | $0.70 | -$0.11 (13.3%) |
| April 2025 | $0.744003 | $0.64 | -$0.10 (13.4%) |
| March 2025 | $0.8424 | $0.73 | -$0.11 (13.2%) |
Aluminum Clips & MLC Scrap Price History — Daily Data
A day-by-day market snapshot in exact numbers. Every day we aggregate buy prices from local scrap yards, recording the average, low, and high. Use this table to track real price movement over recent days.
| Date | Avg price (per lb) | Change | Range (Low/High) |
|---|---|---|---|
| 11/3/2025 | $0.81 / lb | — no change | $0.76 - $0.86 |
Maximizing Payouts on Aluminum Clips & MLC
If you are hauling clean aluminum punchings, plate scraps, or heavy solids, you are likely sitting on Aluminum Clips & MLC (Mixed Low Copper). This is a premium industrial grade. Buyers want uncoated, unpainted aluminum with bare minimum impurities. Right now, scrap yards are paying anywhere from $0.55 to $1.02 per pound for properly prepped loads. The tighter you sort, the closer you get to the top of that national average of $0.70.
Because this grade is tied closely to the LME exchange, yard payouts typically hover about 13.3% below spot. Mills demand pure melt stock, which means scrap buyers at the scale are incredibly strict. One bad piece of contamination can tank your entire ticket.
The Scale Survival Guide: Prepping Your MLC
Not all shiny metal makes the cut. To secure the premium $1.02 payout, your material must be absolutely free of dirt, oil, plastic, and iron. Here is how veterans ensure their loads pass inspection:
- Strip the contamination: Remove any tape, vinyl decals, rubber grommets, or heavy grease.
- Watch for Zinc: Die-cast zinc looks exactly like aluminum but is noticeably heavier. Toss it in the wrong bin, and the yard buyer will instantly drop your grade.
- Zero Steel Tolerance: Run a magnet through the bin. A single hidden steel bolt means you are getting paid for dirty aluminum.
Yard Pro Tip: When dealing with Aluminum Clips & MLC, always check punched holes and sheared edges for leftover steel rivets or drill shavings. Mills despise iron contamination in low-copper aluminum melts. If a scale master runs a magnet over your gaylord box and picks up even one steel shaving stuck in a clip, they will likely downgrade the entire load to breakage or dirty aluminum.
The Cost of Lazy Sorting
Throwing all your aluminum into one bucket is a rookie mistake. If your Aluminum Clips & MLC contains painted pieces, light foil, or iron screws, the yard will downgrade the entire load. Selling premium MLC as Aluminum Foil & Light Gauge will cost you roughly $0.60 per pound at the scale. Over a heavy gaylord box, that is hundreds of dollars left on the table. For context, yards are currently paying $0.30 to $0.70/lb and $0.72 to $0.87/lb for other clean aluminum grades. Sort it right, or lose your shirt.
Frequently Asked Questions
What exactly makes aluminum qualify as MLC?
MLC stands for Mixed Low Copper. It consists of bare, uncoated, and unpainted aluminum clippings, solids, and punchings. It must be completely free of iron, plastic, hair wire, and heavy zinc or magnesium alloys.
Why is my local yard paying below the national average?
National averages sit at $0.70, but local prices in Dover depend on freight costs to the nearest mill and the volume you bring. Peddlers bringing in a single bucket will almost always get a lower tier price than a fabrication shop dropping off three gaylord boxes of pristine clips.
Can I mix Aluminum 5052 with my MLC?
Generally, clean Aluminum 5052 (Plate) can be grouped into MLC at many yards if it is uncoated, but dedicated 5052 might fetch a slightly different premium depending on the specific buyer's mill contracts. Always ask your scale master before mixing alloys to ensure you don't dilute the value of either grade.
Aluminum Clips & MLC scrap prices in Dover, Ohio on the map
You're viewing Aluminum Clips & MLC scrap prices in Dover, Ohio. Below are other states: click a link to see Aluminum Clips & MLC prices elsewhere.