Current Prices for E-Scrap & Compressors in Kansas
Get the most accurate market data for E-Scrap & Compressors scrap prices in Kansas. Track how local yard payouts stack up against the COMEX commodity market, utilize our specialized load calculator, and identify the top-paying buyers for electric motors, sealed units, and automotive scrap in Kansas.
Local data is supplemented with national averages for the most accurate estimate. The market moves as one trend — use the national figure as your reference point.
E-Scrap & Compressors Scrap Price Trends
over the last 30 daysIn the last month in the E-Scrap & Compressors category: price is up for 4 grades, price is steady for 5 grades, and price is down for 1 grade.
U.S. National Price Benchmark — E-Scrap & Compressors in Kansas
Local scrap yards in Kansas sometimes post their prices with a short delay. To keep you informed of what your metal is worth right now, we use U.S. national averages as a reference. The secondary metals market responds to exchange moves in sync across the country — use this national benchmark when negotiating with local buyers. E-Scrap & Compressors prices across the U.S. →
Current E-Scrap & Compressors Scrap Prices in Kansas by Grade
Here is the E-Scrap & Compressors data we have on file for Kansas. Local yards don't always update their online prices daily — if your grade isn't listed, use the National Benchmark above as leverage when negotiating with local buyers.
Best Scrap Yards for E-Scrap & Compressors in Kansas
Live prices from local scrap yards in Kansas. Compare offers and find the buyer paying the most.
Wichita Material Recovery - WMR - 303-9303
Don’t see your scrap yard in Kansas? List it for free.
Hundreds of sellers in your area search for current scrap prices every day. Post your buy prices and start getting calls.
🚀 List your scrap yard ⟶E-Scrap & Compressor Load Value Estimator
Selling a mixed load? Pick the grades below — a weight field appears after you select at least one grade, then the calculator estimates your haul’s value from current average prices in Kansas.
Yield Analysis: Understanding E-Scrap & Compressor Recovery
The exchange price represents pure, refined metal (99.9%+). Each scrap grade contains varying levels of impurities, which require different amounts of processing. The higher the percentage, the more valuable the grade and the closer its payout is to the spot price.
| Grade | Exchange (100%) | Yard Price (per lb) | Grade Quality |
|---|---|---|---|
| Scrap Engines & Transmissions | $1.00 LME | $0.17 | High Grade•16% |
| Aluminum & Dirty Motors | $1.00 LME | $0.16 | High Grade•15% |
| Aluminum & Steel Transformers | $1.00 LME | $0.13 | High Grade•12% |
| Automotive Alternators | $5.30 COMEX | $0.48 | Mid Grade•9% |
| Copper Transformers | $5.30 COMEX | $0.43 | Low Grade•8% |
| Automotive Starters | $5.30 COMEX | $0.40 | Low Grade•8% |
| Copper Electric Motors | $5.30 COMEX | $0.38 | Low Grade•7% |
| Sealed Unit Compressors (Appliance) | $5.30 COMEX | $0.32 | Low Grade•6% |
| Automotive AC Compressors | $5.30 COMEX | $0.28 | Low Grade•5% |
| Light Ballasts & Power Supplies | $5.30 COMEX | $0.23 | Low Grade•4% |
📊 What Determines Grade Value:
- Copper-to-Steel Ratio: Items like Copper Electric Motors command higher prices because the copper windings inside are more valuable than the heavy steel housing.
- Winding Material: Buyers look for copper; Aluminum & Dirty Motors fetch less because aluminum is cheaper and harder to extract from the motor core.
- Component Density: Heavy casings on Sealed Unit Compressors (Appliance) lower the overall payout percentage relative to the total weight compared to lighter automotive components.
- Core Charge Potential: Many yards pay more for Automotive Starters and alternators because they can be sold as 'rebuildable cores' rather than just straight scrap metal.
Maximizing Returns on E-Scrap & Compressors in Kansas
In the world of scrap, 'breakage' items like motors and compressors are where many peddlers lose money by not knowing their grades. The current range for this category in Kansas spans from $0.09 to $0.60 per pound. While these aren't as high as clean copper, the weight adds up fast. Our data shows that Copper Electric Motors and Automotive Alternators remain the most sought-after items by regional processors due to their high recovery of non-ferrous metals.
Why Sorting Your Motors Matters
Not all motors are created equal. If you toss Aluminum & Dirty Motors into a gaylord box with premium copper units, don't be surprised when the yard pays you the lower rate for the whole load. This 'downgrading' can cost you upwards of $0.35 on a single heavy load. Local yards in Kansas are looking for the copper content, so being able to identify your Copper Transformers versus aluminum versions is the difference between a good day and a great one.
Yard Pro Tip: When dealing with Sealed Unit Compressors (Appliance), never cut them open yourself unless you have the proper EPA certifications for refrigerant recovery. Most yards want them sealed and intact; if they see a jagged torch cut, they may refuse the load entirely due to environmental liability.
E-Scrap Prep & Sorting Guide
- Automotive Scrap: Keep Automotive Starters and AC compressors separate. These often go to specialized core buyers rather than the shredder, resulting in a better price.
- Electric Motors: Remove any attached pumps, pulleys, or heavy steel brackets. You want to sell the motor, not the junk steel attached to it.
- Transformers: Large Copper Transformers are a goldmine, but check the weight. If they have heavy steel mounting frames, some yards will knock the price down to 'Mixed Motors' grade.
- E-Scrap Power Supplies:Light Ballasts & Power Supplies are often graded as a mid-tier electronic scrap. Ensure ballasts are marked 'No PCBs' or yards in Kansas might reject them on sight.
Market Insights
The Mechanics of E-Scrap & Compressor Pricing
Prices for E-Scrap & Compressors in Kansas are highly sensitive to both the copper and steel markets. Since most of these items are 'breakage' scrap—meaning they require industrial shredding or manual teardown to recover the internal metals—the prices reflect the labor involved. Local yards track the COMEX closely, but your actual payout is determined by the yield percentage. If a motor is 15% copper by weight, expect the price to move in tandem with copper futures minus a significant processing spread of approximately 93.1.
Pro Tips for Better Scale Payouts
- Cut the Cords: Don't leave long power leads on your motors; cut them off and sell them as insulated copper wire for a higher per-pound rate.
- Drain Your Fluids: Many yards will reject or deduct weight from Scrap Engines & Transmissions if they are dripping oil or coolant.
- The Magnet Test: Transformers with copper windings are worth significantly more than aluminum ones. Scratch the wire—if it’s silver inside, it’s aluminum.
- Separate AC Units: Ensure Automotive AC Compressors are separated from steel compressors to secure the premium aluminum-case pricing.
Frequently Asked Questions
What are 'Sealed Units' in the scrap world?
Sealed units are the compressors found in refrigerators, freezers, and air conditioners. They consist of a thick steel shell housing a high-quality electric motor. Because they are difficult to process, yards pay a flat 'Sealed Unit' rate.
Are alternators and starters worth more than regular motors?
Yes, usually. Automotive Alternators contain a high density of copper and specialized components. Many buyers offer a premium over standard electric motors because of their higher recovery value.
Do yards pay more for large engines?
For Scrap Engines & Transmissions, weight is your friend, but purity is your enemy. An engine with the transmission and all accessories (alternator, starter) still attached might be bought as a 'Complete Auto Engine' grade, which is often a better deal than stripping it to the bare block.
E-Scrap & Compressors scrap prices in Kansas on the map
The map shows cities in Kansas with E-Scrap & Compressors scrap prices. Click a marker or pick a city in the list below to see E-Scrap & Compressors prices in that location.