Dirty Aluminum Extrusion Scrap Prices in Miami
Current Dirty Aluminum Extrusion prices at scrap yards in Miami, Florida. Compare local offers against the U.S. national average to get the most money for your scrap.
Average Dirty Aluminum Extrusion Price
The min/max range reflects a blended index (local + national data). Your local high may be lower.
- Low (up to $0.60): Floor price, typically for small loads.
- Mid ($0.68): A fair deal for standard quantities.
- High ($0.90+): Top-dollar rate. Offered for large commercial loads or by the most competitive buyers.
Pricing verified from 2 live board rates today.
Dirty Aluminum Extrusion price reference for Miami, Florida
Scrap yards in Miami, Florida don’t always update their prices in real time. To give you a reliable current value, we use the U.S. national average ($0.70/lb). The secondary metals market tracks exchange moves consistently across the country. Use this national figure as your benchmark when negotiating with local yards. Dirty Aluminum Extrusion prices across the U.S. →
Top Paying Scrap Yards for Dirty Extrusion Miami, FL
These are scrap yards in Miami, Florida that recently updated Dirty Aluminum Extrusion prices in our database. Call them to lock in a quote. If your city isn't listed, use the National Index above as a bargaining reference with your nearest buyer.
USA Scrap Metal & Recycling
Scrap X
Don’t see your scrap yard in Miami, Florida? List it for free.
Hundreds of sellers in your area search for current scrap prices every day. Post your buy prices and start getting calls.
🚀 List your scrap yard ⟶Dirty Extrusion vs. Clean Upgraded Aluminum
The #1 rule at scrap yards: if you mix grades, they’ll weigh everything at the lowest rate. See the price gap below — if you have higher-value metal, always sort and weigh each grade separately to avoid leaving money on the table.
Historical Price Trends for Dirty Aluminum Extrusion
This chart shows where the market is headed. If the line is climbing, prices are rising — you might get a better deal in a few days. If it’s dropping, don’t wait: sell today before yards lower their buy prices further.
Dirty Aluminum Extrusion: Scrap Yard Price vs. World Market (LME)
Avg scrap yard price
World market price (LME)
Dirty Aluminum Extrusion: Spread vs. Exchange — Monthly History
| Period | World price (per lb) | Scrap yard price (per lb) | Spread vs. exchange |
|---|---|---|---|
| March 2026 (current) | $1.096662 | $0.65 | -$0.44 (40.4%) |
| February 2026 | $1.2032 | $0.71 | -$0.49 (41%) |
| January 2026 | $1.051423 | $0.66 | -$0.39 (37%) |
| December 2025 | $0.982942 | $0.62 | -$0.36 (37.1%) |
| November 2025 | $0.930043 | $0.61 | -$0.32 (34.7%) |
| October 2025 | $0.887584 | $0.60 | -$0.29 (32.8%) |
| September 2025 | $0.86119 | $0.61 | -$0.25 (29.1%) |
| August 2025 | $0.866703 | $0.59 | -$0.28 (32.4%) |
| July 2025 | $0.837774 | $0.53 | -$0.31 (37%) |
| June 2025 | $0.802343 | $0.56 | -$0.24 (30.4%) |
| May 2025 | $0.807171 | $0.51 | -$0.30 (36.9%) |
| April 2025 | $0.744003 | $0.47 | -$0.28 (37.1%) |
| March 2025 | $0.878574 | $0.61 | -$0.27 (30.9%) |
| February 2025 | $0.893382 | $0.56 | -$0.33 (37.1%) |
| January 2025 | $0.812942 | $0.51 | -$0.30 (36.9%) |
| December 2024 | $0.805026 | $0.51 | -$0.30 (37.1%) |
| November 2024 | $0.80919 | $0.51 | -$0.30 (37.3%) |
| October 2024 | $0.84811 | $0.53 | -$0.31 (36.9%) |
| September 2024 | $0.84145 | $0.53 | -$0.31 (37%) |
| August 2024 | $0.838665 | $0.53 | -$0.31 (36.8%) |
| July 2024 | $0.905877 | $0.57 | -$0.34 (37%) |
| June 2024 | $0.957757 | $0.60 | -$0.36 (37.1%) |
| May 2024 | $0.995197 | $0.63 | -$0.37 (37.1%) |
| April 2024 | $0.9588 | $0.60 | -$0.36 (37%) |
| March 2024 | $0.916803 | $0.58 | -$0.34 (37.1%) |
| February 2024 | $0.908876 | $0.57 | -$0.34 (36.9%) |
| January 2024 | $0.981155 | $0.62 | -$0.36 (36.8%) |
| December 2023 | $0.992781 | $0.63 | -$0.37 (37%) |
| November 2023 | $0.936113 | $0.59 | -$0.35 (36.9%) |
| October 2023 | $0.91751 | $0.58 | -$0.34 (37%) |
| September 2023 | $0.946997 | $0.60 | -$0.35 (36.9%) |
| August 2023 | $0.930013 | $0.59 | -$0.34 (37%) |
| July 2023 | $0.934068 | $0.59 | -$0.35 (37%) |
| June 2023 | $0.944237 | $0.59 | -$0.35 (37.1%) |
| May 2023 | $0.9455 | $0.60 | -$0.35 (37%) |
| April 2023 | $0.971563 | $0.61 | -$0.36 (37.1%) |
| March 2023 | $1.031729 | $0.64 | -$0.39 (37.7%) |
| February 2023 | $1.081664 | $0.68 | -$0.40 (37%) |
| January 2023 | $1.07489 | $0.68 | -$0.39 (36.6%) |
Dirty Aluminum Extrusion Scrap Price History — Daily Data
A day-by-day market snapshot in exact numbers. Every day we aggregate buy prices from local scrap yards, recording the average, low, and high. Use this table to track real price movement over recent days.
| Date | Avg price (per lb) | Change | Range (Low/High) |
|---|---|---|---|
| 3/4/2026 | $0.60 / lb | -$0.10 | $0.60 - $0.60 |
| 2/17/2026 | $0.70 / lb | -$0.10 | $0.70 - $0.70 |
| 11/3/2025 | $0.80 / lb | +$0.10 | $0.80 - $0.80 |
| 9/16/2025 | $0.70 / lb | -$0.10 | $0.70 - $0.70 |
| 9/3/2025 | $0.80 / lb | +$0.10 | $0.80 - $0.80 |
| 6/15/2025 | $0.70 / lb | -$0.05 | $0.70 - $0.70 |
| 3/27/2025 | $0.75 / lb | +$0.10 | $0.75 - $0.75 |
| 3/13/2023 | $0.65 / lb | -$0.05 | $0.65 - $0.65 |
The Reality of Selling Dirty Aluminum Extrusion
When tearing out old commercial storefronts, residential windows, or structural framing in Miami, you are usually left with mountains of Dirty Aluminum Extrusion. Extruded aluminum is highly sought after by mills because it melts down cleanly, but when it is "dirty"—meaning it still has steel screws, rubber weather stripping, glass, or plastic thermal breaks attached—yards have to pay less to cover the heavy processing labor. Our data shows yards are currently paying anywhere from $0.60 for heavily contaminated material up to $0.90 for frames that are mostly clean but just missed the cut.
The Mixing Trap: Leaving Money on the Scale
The biggest mistake contractors and scrappers make is throwing partially clean pieces in with the totally dirty stuff. If you have a bin of clean Painted Aluminum Extrusion and toss in a few heavy window frames loaded with steel brackets and rubber, the scale master will downgrade the entire load to the dirty rate. You are looking at a brutal loss of roughly $0.49 per pound just for skipping the sorting process. Keep your clean, stripped extrusion entirely separate from your dirty pile.
The Scrapper's Guide to Processing Window Frames
If you want to maximize your payout Miami, you need to understand exactly what makes extrusion "dirty" and whether it is worth your time to fix it.
- Steel Screws & Brackets: A quick run with a magnet will spot hidden steel. Zap these out with an impact driver to instantly upgrade your metal.
- Rubber & Felt: Weather stripping adds useless tare weight and contaminates the melt. Rip it out of the tracks using a pair of heavy pliers.
- Die-Cast Zinc Corners: Many aluminum window frames are held together inside the corners with cast zinc corner keys. These look like aluminum but are heavier and will cause your load to be graded as dirty. Break them out.
Yard Pro Tip: Before you spend an hour trying to strip a heavy commercial window frame, check the edge for a thick, hard plastic resin poured straight down the center channel. That is a "thermal break" used for insulation. Unless you have a massive hydraulic shear, you cannot remove it effectively. Don't waste your time trying to make it clean—just accept the dirty extrusion price for those specific pieces and focus your labor on stripping the regular, non-thermal frames!
Frequently Asked Questions
What exactly qualifies as Dirty Aluminum Extrusion?
It typically includes 6000-series aluminum (like Aluminum 6061 Structural or standard window and door frames) that still has foreign attachments. This means steel screws, rubber gaskets, zinc die-cast corners, or plastic thermal breaks are still firmly attached to the metal.
How much is dirty extrusion worth right now?
Depending on the LME markets, prices typically sit about 37% below spot aluminum. Currently, the national average is $0.70 per pound. Yards will aggressively lower the price if there is excessive glass, wood, or iron attached.
Is it worth cleaning my dirty extrusion?
Absolutely, as long as it doesn't have a thermal break. Ripping out rubber and backing out screws can upgrade your material to a clean extrusion grade, which pays significantly more. Just remember that if you are dealing with sheet aluminum or different alloys like Aluminum 3003 or Aluminum 5052 (Plate), make sure you sort those into their own respective bins, as they price differently than extrusion.
Dirty Aluminum Extrusion scrap prices in Miami, Florida on the map
You're viewing Dirty Aluminum Extrusion scrap prices in Miami, Florida. Below are other states: click a link to see Dirty Aluminum Extrusion prices elsewhere.