Aluminum 6061 Structural Scrap Prices in Benton Harbor
Current Aluminum 6061 Structural prices at scrap yards in Benton Harbor, Michigan. Compare local offers against the U.S. national average to get the most money for your scrap.
Average Aluminum 6061 Structural Price
The min/max range reflects a blended index (local + national data). Your local high may be lower.
- Low (up to $0.70): Floor price, typically for small loads.
- Mid ($0.76): A fair deal for standard quantities.
- High ($0.87+): Top-dollar rate. Offered for large commercial loads or by the most competitive buyers.
Pricing verified from 1 live board rates today.
Aluminum 6061 Structural price reference for Benton Harbor, Michigan
Scrap yards in Benton Harbor, Michigan don’t always update their prices in real time. To give you a reliable current value, we use the U.S. national average ($0.77/lb). The secondary metals market tracks exchange moves consistently across the country. Use this national figure as your benchmark when negotiating with local yards. Aluminum 6061 Structural prices across the U.S. →
Top Scrap Yards Buying Aluminum 6061 in Benton Harbor
These are scrap yards in Benton Harbor, Michigan that recently updated Aluminum 6061 Structural prices in our database. Call them to lock in a quote. If your city isn't listed, use the National Index above as a bargaining reference with your nearest buyer.
Benton Metal Recycling
Don’t see your scrap yard in Benton Harbor, Michigan? List it for free.
Hundreds of sellers in your area search for current scrap prices every day. Post your buy prices and start getting calls.
🚀 List your scrap yard ⟶How 6061 Structural Compares to Other Aluminum Grades
The #1 rule at scrap yards: if you mix grades, they’ll weigh everything at the lowest rate. See the price gap below — if you have higher-value metal, always sort and weigh each grade separately to avoid leaving money on the table.
Aluminum 6061 Price Trends & Market History
This chart shows where the market is headed. If the line is climbing, prices are rising — you might get a better deal in a few days. If it’s dropping, don’t wait: sell today before yards lower their buy prices further.
Aluminum 6061 Structural: Scrap Yard Price vs. World Market (LME)
Avg scrap yard price
World market price (LME)
Aluminum 6061 Structural: Spread vs. Exchange — Monthly History
| Period | World price (per lb) | Scrap yard price (per lb) | Spread vs. exchange |
|---|---|---|---|
| March 2026 (current) | $1.096662 | $0.76 | -$0.33 (30.4%) |
| February 2026 | $1.2032 | $0.85 | -$0.35 (29.4%) |
| January 2026 | $1.051423 | $0.74 | -$0.31 (29.5%) |
| December 2025 | $0.982942 | $0.68 | -$0.30 (30.9%) |
| November 2025 | $0.930043 | $0.61 | -$0.32 (34.4%) |
| October 2025 | $0.887584 | $0.57 | -$0.32 (35.7%) |
| September 2025 | $0.86119 | $0.61 | -$0.25 (29.4%) |
| August 2025 | $0.866703 | $0.54 | -$0.33 (37.8%) |
| July 2025 | $0.837774 | $0.59 | -$0.25 (29.3%) |
| June 2025 | $0.802343 | $0.57 | -$0.24 (29.5%) |
| May 2025 | $0.807171 | $0.57 | -$0.24 (29.3%) |
| April 2025 | $0.744003 | $0.52 | -$0.22 (29.5%) |
| March 2025 | $0.878574 | $0.62 | -$0.26 (29.5%) |
| February 2025 | $0.893382 | $0.63 | -$0.26 (29.4%) |
| January 2025 | $0.812942 | $0.58 | -$0.24 (29.2%) |
| December 2024 | $0.805026 | $0.57 | -$0.24 (29.5%) |
| November 2024 | $0.80919 | $0.57 | -$0.24 (29.4%) |
| October 2024 | $0.84811 | $0.60 | -$0.25 (29.4%) |
| September 2024 | $0.84145 | $0.60 | -$0.25 (29.3%) |
| August 2024 | $0.838665 | $0.59 | -$0.25 (29.6%) |
| July 2024 | $0.905877 | $0.64 | -$0.27 (29.5%) |
| June 2024 | $0.957757 | $0.68 | -$0.28 (29.3%) |
| May 2024 | $0.995197 | $0.70 | -$0.29 (29.3%) |
| April 2024 | $0.9588 | $0.68 | -$0.28 (29.5%) |
| March 2024 | $0.917217 | $0.64 | -$0.27 (29.8%) |
Aluminum 6061 Structural Scrap Price History — Daily Data
A day-by-day market snapshot in exact numbers. Every day we aggregate buy prices from local scrap yards, recording the average, low, and high. Use this table to track real price movement over recent days.
| Date | Avg price (per lb) | Change | Range (Low/High) |
|---|---|---|---|
| 12/5/2025 | $0.58 / lb | +$0.28 | $0.45 - $0.70 |
| 11/3/2025 | $0.30 / lb | -$0.05 | $0.30 - $0.30 |
| 8/26/2025 | $0.35 / lb | -$0.20 | $0.35 - $0.35 |
Maximizing Your Payout on Aluminum 6061 Structural
When you roll up to the yard with Aluminum 6061 Structural, you are hauling one of the most reliable money-makers in the non-ferrous game. Used heavily in construction, staging, bleachers, and marine applications, this alloy is prized by mills for its strength and workability. Nationwide, our data shows clean 6061 pulling anywhere from $0.72 to $0.87 per pound, depending on broader market conditions and the appetite of your local buyers in Benton Harbor. But securing that top-tier pricing means you need to prep the material exactly how the scale master expects to see it.
Recognizing 6061 on the Job Site
You will typically find 6061 in the form of thick plates, heavy angles, I-beams, and large diameter tubing. It is noticeably harder and more rigid than standard Aluminum 3003 sheet scrap and will not bend easily under pressure. If you are tearing down old scaffolding, heavy boat trailers, or structural framing, there is a very good chance you are handling 6061.
Mistakes That Crush Your Scale Ticket
The absolute fastest way to lose money at the scrap yard is poor preparation. If you leave heavy zinc bolts, steel plates, or iron rivets attached to your structural aluminum pieces, the buyer has no choice but to downgrade the entire load to 'irony aluminum' or breakage. That cuts your payout drastically.
Yard Pro Tip: When scrapping 6061 structural beams or thick angles, always run a strong magnet over every connection point. Steel bolts, hidden rivets, or reinforced heli-coil inserts left in the aluminum will instantly downgrade your load. Cut those structural joints off completely with a sawzall or torch to secure the clean, bare structural price.
The Scrapper's Guide to Prep and Sorting
Separation is where the real money is made. Never mix your heavy 6061 with lower-grade material. If you get lazy and toss your heavy structural pieces into a bin with Aluminum Foil & Light Gauge, you are taking a massive hit. Our data shows a potential loss of $0.67 per pound just for failing to keep them separate. You also need to keep it distinct from Aluminum 6063 Extrusion (Clean), as yards often price these two premium alloys differently depending on their downstream mill buyers.
- Clean 6061: Bare, unpainted metal free of dirt, oil, steel fasteners, and plastic. Expect prices to hover near $0.87.
- Painted/Anodized: Many yards will pay less for painted or heavily anodized 6061, pushing your price closer to $0.72 due to the extra refining required.
- Mixed Loads: If your load contains 6061 mixed with $1.20 to $1.32/lb, the yard will almost always pay you the rate of the cheapest metal in the pile. Sort it out.
Frequently Asked Questions
What is the current average price for 6061 structural aluminum?
Nationally, scrap yards are paying an average of $0.77 per pound. This benchmark fluctuates heavily based on the LME market, usually tracking about 29.4% below the spot price depending on yard margins.
Do I need to strip the paint off 6061 to get the best price?
Ideally, yes, or at least separate the painted pieces from the bare ones. Painted structural aluminum is treated as a separate, lower-tier grade by many buyers and pays less than perfectly clean, bare metal. Always ask your yard how they grade painted material before you dump.
Can I mix 6061 structural with 6063 extrusions?
It is not recommended. While both are high-value alloys, 6063 extrusions generally have a different chemical composition and often command a different rate at the scale. Sorting them into separate gaylord boxes guarantees you get the maximum value for each specific grade.
Aluminum 6061 Structural scrap prices in Benton Harbor, Michigan on the map
You're viewing Aluminum 6061 Structural scrap prices in Benton Harbor, Michigan. Below are other states: click a link to see Aluminum 6061 Structural prices elsewhere.