Aluminum Turnings Scrap Prices in New Jersey

Maximizing Your Payout on Machine Shop Aluminum Turnings

Machine shops, fabricators, and CNC operators generate mountains of aluminum turnings, chips, and borings. Nationwide, buyers are paying anywhere from $0.20 to $0.43 for this material. Because these shavings have a massive surface area and melt differently than solid scrap, they are highly susceptible to contamination and are generally priced lower. Our data shows that yards are notoriously strict on turnings. If you want to see payouts near the $0.26 mark, you need to understand exactly what the scale master is looking for when they pop the lid off your drums.

The Moisture and Oil Trap: Don't Give Away Free Weight

The biggest issue with Aluminum Turnings isn't usually mixed metals; it's the cutting fluids. Turnings soak up coolant and oil like a sponge. When you hit the scale New Jersey, the yard will visually inspect the drum. If there is a puddle of oil at the bottom, they will hit you with a substantial percentage deduction (often called a 'shrink' or 'dockage') to account for the liquid weight. Yards pay for metal, not for the hazardous waste they have to manage. Don't let them dock you 10% or more on a heavy load just because you didn't let your chips drain.

Yard Pro Tip: Set up a two-drum gravity drain system in your shop: punch holes in the bottom of your primary turnings barrel and nest it inside a secondary catch barrel. Let the cutting fluid drain for a few days before your scrap run. Also, aggressively sweep a heavy-duty magnet through the dry chips. If you machined a steel part on the same lathe and a few steel spirals ended up in the aluminum bin, the yard's magnet will catch them, and your whole load drops to an 'irony aluminum' price.

Avoid Costly Mixing Mistakes

Turnings are one of the lowest-paying aluminum grades because they require special processing, like briquetting, before they can be efficiently melted. If you have solid cut-offs, punchings, or clean plate chunks, do not throw them in the turnings bin! Mixing clean solid scrap like Aluminum Clips & MLC into a barrel of turnings will cost you big time, representing a potential loss of $0.44 per pound because the yard will automatically downgrade the entire container to the lower turnings price. Keep your solids separated, whether it is Aluminum 3003, Aluminum 5052 (Plate), or Aluminum 6061 Structural. Clean solids are often worth $0.72 to $0.87/lb, so keep them far away from your shavings.

Prep and Sorting Guide for Aluminum Turnings

Getting your turnings ready for maximum profit doesn't take much extra time if you build good habits in your shop. Follow these steps:

• Drain Everything: As mentioned, dry chips pay more. Excess oil is the fastest way to get your price slashed.
• Keep it Swept and Clean: Never sweep the shop floor and dump the dust, bolts, zip-ties, and trash into the turnings drum. Trash contamination equals a rejected load or a severe downgrade.
• Separate by Alloy (If Possible): If you run purely 6061 or 7075 through your CNC, label the barrel and let the yard know. Segregated, known-alloy chips can sometimes fetch a slight premium at specialized buyers compared to mixed-alloy turnings.